400-101-5915 CN
400-101-5915 CN
Product
Current location:Home-Product-Monitoring alarm series
Programmable electronic lights devices

Programmable electronic lights devices / CD

Function : CDI programmable electronic lantern device is a device that is hung around the mast and deck of a ship to increase the atmosphere of celebration during festivals or celebrations.
Features :

Using color LED lighting, irradiation distance, long life, energy saving and environmental protection, compared with traditional lights, energy saving more than 85%.

With a variety of programmable working mode, color, brightness are controllable, display effect rich and colorful, more advanced and ornamental, but also with background music synchronization, foil atmosphere.

Use tensile cable, tensile strength and wire rope equivalent.

Adopt high strength material, not afraid of extrusion, not easy to damage, easy to put, convenient storage.

The standard length (10m as the unit) is adopted for quick connection. The total length and spacing of the lights can be adjusted to meet the requirements of different ships.

The control box or controller adopts electric communication to control each control box, so as to realize the cooperative control or fixed-point control of the whole ship's lights. There is no need to lay control cable in order to meet the requirements of the old ship.

Model namedDetailed parametersPrinciple block diagramOperating instructionsAttachment configuration

1.1  彩灯控制箱


1.2  彩灯分控制箱


1.3 彩灯串

1、彩灯控制箱

输入电压

三相 AC220V±10%  50Hz

输出电压

单相 AC220V±10%  50Hz

输出路数

默认10分路 (三相平衡式)

防护等级

IP 23、IP44

外形尺寸

高500×宽400×厚135 mm(不含钢丝绳减震器)

安装尺寸

高540×宽320安装孔φ12(配钢丝绳减震器)

重    量

约25kg

2、彩灯分控制箱

输入电压

单相 AC220V±10%  50Hz

输出电压

DC28V

控制彩灯路数

2路(同时工作或互为备用),每路最多带120只彩灯。

防护等级

IP56

外形尺寸

高180×宽180×厚145mm

安装尺寸

高120×宽205mm(便携式带吸盘)

3、彩灯串

工作电源

DC28V

功    耗

约每盏灯1.6W

彩灯间距

1型为1m,2型为0.5m,起始电缆长度根据订货要求确定。

彩灯串长度

根据各分路实际需求确定,大于10m以10m为一个基本单位。

防护等级

IP56

注:在各分路中如有支路,需加分支连接器,分支彩灯串长度另说明。

详细参数请联系客服

1)  根据系统图连接各路彩灯串,彩灯串之间通过防水金属插头相连,可拆卸每个灯壳上都有固定孔,挂钩可以伸入固定孔,彩灯串通过挂钩固定在绳索上,见下图4-1:

图4– 1彩灯串固定示意图

彩灯串之间通过防水金属插头相连,可拆卸,注意保证插头插紧后才可上电,不可带电插拔。见下图3-2:


图4–2彩灯串之间连接插头图

2)  闭合彩灯控制箱内总开关与各路彩灯分控制箱供电开关,对整套彩灯系统供电,

3)  检查彩灯控制箱内彩灯控制模块是否正常工作,

4)  检查彩灯分控制器是否正常工作,

5)  检查各彩灯串是否正常点亮,

6)  设置彩灯播放模式。


序号

名称

型号规格

备注

1

不锈钢钢丝绳

Φ6带护套

2

钢丝绳紧线器

BQ2000-B

配锁具螺旋扣与扎头

3

磁性挂钩

CDI-CT/G2

用于钢制无栏杆处悬挂彩灯串