400-101-5915 CN
400-101-5915 CN
Product
Current location:Home-Product-Monitoring alarm series
BTA cabin high temperature alarm system

BTA cabin high temperature alarm system / BTA

Function : 1. Alarm device The alarm board has functions of light test, noise elimination and reset;
2. When the temperature of any special storage room in the monitored cabin reaches the set temperature of 30 ° C (preset alarm point, parameters adjustable) and 70 ° C (high-temperature alarm point, parameters adjustable), the alarm device can give alarm instructions and send light alarm signals to different special compartments.
3. The alarm device can monitor the operating signal of air conditioning in the special cabin;
4. In case of 30 ° C alarm in any special cabin, the device not only makes sound and light alarm by itself, but also immediately outputs the signal of contact without source to the special cabin air conditioning starter for starting the air conditioning;
5. When a 70 ° C warning alarm occurs in any special cabin, the device will immediately output the signal of unsourcable contacts to the ship's general alarm system, and at the same time output a set of passive contacts to the water spraying system, which is used to start the spraying system;
6. Temperature value of alarm point can be set according to demand.
Features :

It has functions of temperature display, high temperature sound and light alarm, etc.

The cabin high temperature alarm system is composed of high temperature alarm control box and flameproof temperature sensor, which can monitor the temperature of the special storage room.

Model namedDetailed parametersPrinciple block diagramOperating instructionsAttachment configuration

BTA型舱室高温报警系统由高温报警控制箱、隔爆温度传感器等组成,能监测并显示专用储藏室温度,报警板具有试灯、消音、复位的功能。

当任一舱室达到预报警(预设30℃,可根据需求进行调整)时,装置发出相应声光报警,同时立即输出一无源触点信号至专用舱室空调或风机启动器,用于起动空调或风机。

当任一舱室达到高温报警(预设70℃,可根据需求进行调整)时,装置发出相应声光报警,立即输出一无源触点信号至全船通用报警系统,同时输出一组无源触点至水喷淋系统,用于启动喷淋系统。


技术指标:

输入电源

AC220V(+6%~-10%)50Hz

结构形式

壁挂式

防护等级

高温报警控制箱  IP23

隔爆温度传感器   IP65

防爆等级

隔爆温度传感器 Exd BT4Exd CT6

报警接口

综合报警信号输出(无源常开触点)

超温报警信号输出(无源常开触点)


详细参数请联系客服

详细参数请联系客服