400-101-5915 CN
400-101-5915 CN
Product
EET emergency car clock

EET emergency car clock / EET型

Function : EET type emergency car clock is a signal contact device that sends the operator instruction from the cab to the engine room or the control room in case of the failure of the main car clock, and then the operator replies to the execution situation. The emergency car clock is composed of transmitter, receiver and power control module.
The transmitter is installed on the driving console, the receiver is installed next to the main engine or the centralized control console, and the power control module is installed in the driving console or the centralized control console. The transmitter is equipped with such buttons as dimmer, test lamp and muffler, etc. It has the main power loss alarm, wrong direction alarm and extension alarm interface.
Features :

The control panel adopts LED indicator and key operation, with beautiful appearance, clear indication and easy operation and maintenance

The control panel has local dimming function and CAN interface with remote unified dimming

CAN CAN be used for long-distance and reliable communication

Two-way communication, two-way call/reply

With multiple location mode selection, WHC/ECC, WHC/ER, ECC/ER modes can be selected

Adopt the main and standby power supply, automatically switch, ensure the system to work stably and continuously, and have the main power loss alarm function

With external sound and light alarm or electric bell interface, easy to alarm extension

It has the function of wrong direction alarm

It has external communication interface and VDR interface

Model naming detailed parameters principle block diagram operation description

Model namedDetailed parametersPrinciple block diagramOperating instructionsAttachment configuration

工作电压

主电源

单相AC220V±10%,50/60Hz 或DC24V±20%

备用电源

DC24V±20%

环境温度

-10℃~55℃

安装形式

嵌入式、壁挂式

防护等级

IP20(嵌入式)、IP44(壁挂式)

操纵命令

十一档

进一、进二、进三、进四、退一、退二、退三、退四及完车、备车和停车

十三档

进一、进二、进三、进四、进五、退一、退二、退三、退四、退五及完车、备车和停车

报警信息

主电源失电报警、齿轮箱错向报警

通信接口

2路RS485(符合IEC61162标准)

发令回令功能

轻按发信器档位按钮(左机/右机),对应呼叫指示灯闪烁,蜂鸣器发出间断音;收信器上对应指示灯闪烁,机旁电铃或报警点笛发出响声。 当按下被呼叫收信器对应按钮,应答成功,对应指示灯平光停闪,蜂鸣器停止发声,电铃或电笛停止响;

模式切换功能

在驾驶室发信器上有模式选择旋钮,选择模式后对应单元可以相互发令回令。未选择的另一位置作为复示;

主电失电报警

系统采用主备电两路供电,当主电失电时自动切换到备电,系统发出主电失电的声光报警信号,同时对外输出延伸报警信号;

发讯报警

当应急车钟发讯后未被正确应答前,对外输出发讯未应答的延伸报警信号;

错向报警

通过主机联动开关输入主机状态信号至应急车钟,当系统检测到主机转向信号与应急车钟所要求操作的进退方向相反时,系统发出齿轮箱错向的声光报警信号,同时对外输出延伸报警信号;

试灯/消音功能

按住“试灯/消音”按钮,面板上所有指示灯长亮;当有蜂鸣器报警时短按“试灯/消音”按钮,蜂鸣器消音;

调光功能

转动调光旋钮,可以对面板指示灯的亮度进行调节,以确保值班驾驶员在夜间不受其影响轻松读取信息;

通讯功能:

具有至AMS和VDR的通信接口(RS485)。

可选配声光报警电笛(型号:CJD-BD/BL)